HOBBYTIGER 2S 3S LiPo LiFe Battery Balance Charger with Power Supply for RC Hobby Airsoft

Price:
Product prices and availability are accurate as of 2019-03-18 14:25:02 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

With Intelligent MCU control system,323B lithium battery charger supports to charge the 2S and 3S Li-Po and Life battery.

Specifications:
Input Current: 2500mA/MAX (advise power supply: 12/2A)
Repair voltage: 1.50V-3.00V/CELL
Three charge current: 0.5A, 1.2A, 2.0A
Repair current: 200 mA
Balance of current: 200 mA
Balance of precision: 10mV
Repair bad battery time:1 min
Under voltage protection: less than 10.0V
Over voltage protection: more than 18.0V
Charger instructions: instructions stall charge (3 LED), each cell balanced/charge instructions (3 LED), power supply instructions.

How to use

1. Connect charger and power supply, all LED lights in turn, charging current indicated as 1.2A.
2. Use the right button to choose the charging current.
3. Use the left button to choose battery type. Battery mode must be selected before connected battery and charger.
4. Charge one battery one time.
NEVER charge 2s and 3s battery together at the same time.
The fuctions of Green LED light under normal operation:
Blinking- Charging
Solid- Fully Charged


Attention:
1 .If indicator light does not shine after connected, check if battery is poor connected or battery voltage lower than 1.5V/CELL. When one cell voltage less than 3V, will start small current repair charge. All green indicator light flashes quickly mean repair is failed and battery damaged. Only all cells voltage up to 3V, battery will move into the high current charging till full charge.
2. When using the same power with several this kind of charger, attention to power supply voltage and power levels.
3. Indicator light will flash and stop charging when input voltage under 10V or over 18V. Charger must be restarted to stop the alarm.

Product Features

Smart Lipo Charger.MCU intelligent control build in Lipo repair function and will start trickle charging mode in the voltage range of 1.5-3v per cell. Wide Application:2 types of charge ports for all 2-cell (7.4v), 3-cell (11.1v) Li-polymer batteries pack. 3 charging current (selected by switch): 0.5A, 1.2A, 2A. DO NOT charge 2s and 3s batteries at the same time.Charge 1 battery each time. Balance Mode: balanced charging of each battery cell during the charging process so that the battery will have a better performance and a longer cycle life. Good Heat Dissipation performance. Made of aluminum alloy to avoid the problem of deformation which usually occurs to other cheap plastic chargers. Protection Measures: input under-voltage or over-voltage protection, input polarity protection, output short-circuit protection, output over-voltage protection, output reverse protection.